About Faculty


Dr. S. S. K. Deepak
Associate Professor & PhD Course Coordinator


Dr. S. S. K. Deepak

Date of joining (dd/mm/yyyy) :07/10/2020
Nature of Association :REGULAR
Department :MECHANICAL ENGINEERING
Designation :ASSISTANT PROFESSOR
Qualification :Ph.D. - MECH. ENGG., M.E. - PRODUCTION ENGG. (HONS.), B.E. - MECHANICAL ENGG.
Email :ssk.deepak@bitraipur.ac.in
Mobile :8109124813

Areas of Interest

PRODUCTION ENGINEERING, AIR POLLUTION AND CONTROL, NANO-TECHNOLOGY.

Publications

Details of Publications in Research Journals

S.N. Title of Research Paper Name of the JournalName of Co-Author, if anyVol. /Issue no Year of Publication National/ International
1An Experimental Approach Proposed for Environmental Pollution Reduction caused due to Four Stroke Spark Ignition Engine Automobiles.International Journal of Advanced Science and Technology (IJAST).Dr. T. Rama Rao and Dr. Mukesh ThakurVol. 29, No. 32020international
2Experimental Investigation of Exhaust from Compression Ignition Engine based Automobiles using an Innovative Catalytic Converter during Emissions Test.International Journal of Mechanical Engineering and Technology (IJMET).Dr. Mukesh ThakurVol. 9, No. 132018international
3Experimental Analysis and Behavioral Modeling for Exhaust Emissions from Compression Ignition based Automobiles during Smoke Test using an Innovative Catalytic Converter.International Journal of Mechanical Engineering and Technology (IJMET).Dr. Mukesh ThakurVol. 9, No. 132018international
4Experimentation and Behavioral Modeling for Carbon Monoxide and Hydrocarbons from Compression Ignition Engine Automobiles using an Innovative Catalytic Converter coated with Nano-particles.International Research Journal of Engineering and Technology (IRJET).Dr. Mukesh ThakurVol. 6, No. 12019international
5Experimentation and Behavioral Modeling for Carbon Dioxide, Oxygen and Exhaust Temperature from Compression Ignition Engine Automobiles using an Innovative Catalytic Converter coated with Nano-particles.International Research Journal of Engineering and Technology (IRJET).Dr. Mukesh ThakurVol. 5, No. 122018international
6Utility of a Catalytic Converter with Nano-particles for decreasing Exhaust Gases Concentration Emitted from Automobiles.Research Journal of Recent Sciences (RJRS).Dr. Mukesh ThakurVol. 7, No. 32018international
7Control and Measurement of Exhaust Emissions from the Compression Ignition Engine based Automobiles using a Multi-gas Analyzer.Rungta International Journal of Mechanical and Automobile Engineering (IJMAE).Dr. Mukesh ThakurVol. 2, No. 12017international
8Analysis of a Catalytic Converter for Pollution Prevention from Compression Ignition Engine based Automobiles.Research Journal of Recent Sciences (RJRS).Dr. Mukesh ThakurVol. 6, No. 102017international
9Comparative Analysis of Different Catalysts used in Catalytic Converters for C. I. Engine based Automobiles.Research Journal of Engineering Sciences (RJES).Dr. Mukesh ThakurVol. 6, No. 12016international
10An Innovative Approach for Control of Exhaust Emissions from C. I. Engine based Automobiles using Nano-particles.Rungta International Journal of Mechanical and Automobile Engineering (IJMAE).Dr. Mukesh ThakurVol. 1, No. 12016international
11Analysis based on Atomic Activity of Nano-particles for Exhaust Emissions Reduction from Automobiles using Nano-Coated Catalytic Converter.International Journal of Science & Research (IJSR).Dr. Mukesh ThakurVol. 1, No. 12016international
12Post pollution control Method for C. I. Engine automobiles using Nano-coated Catalytic converter.Research Journal of Engineering Sciences (RJES).Dr. Mukesh ThakurVol. 5, No. 32016international
13Pollution Prevention from Diesel Engine based Automobiles using Nano-particles.International Journal of Engineering Research & Technology (IJERT).Dr. Mukesh ThakurVol. 1, No. 12015international
14Methods of Pollution Control using Nano-particles.International Journal of Advanced Engineering Research & Studies (IJAERS).Dr. Mukesh ThakurVol. 4, No. 22015international
15Turning Process Optimization by Geometric Programming for Minimum Power Input.International Journal of Business Review and Manufacturing Management (IJBRMM).Vol. 2, No. 22012international
16Cutting Speed and Feed Rate Optimization for Minimizing Production Time of Turning Process.International Journal of Modern Engineering Research (IJMER).Vol. 2, No. 52012international
17A Geometric Programming Model for Production Rate Optimization of Turning Process with Experimental Validation.International Journal of Engineering Research and Applications (IJERA).Vol. 2, No. 52012international
18A Geometric Programming Based Model for Cost Minimization of Turning Process with Experimental Validation.International Journal of Engineering Sciences and Emerging Technologies (IJESET).Vol. 3, No. 12012international
19Application of Different Optimization Methods for Metal Cutting Operation – A Review.International Research Journal of Engineering Sciences (RJES).Vol. 1, No. 32012international
20Milling Operation and Its Optimization – A Literature Review.Research Journal of Engineering and Technology (RJET).Vol. 3, No. 42012international
21Analysis of Elliptical Pin Fins Array for Further Improvement in Performance.International Journal of Science and Research (IJSR).L. Rajeshwar RaoVol. 6, No. 52017international
22A Review of Performance of Different Shaped Fins in a Gas Turbine Airfoil.International Journal of Scientific and Engineering Research (IJSER).L. Rajeshwar RaoVol. 8, No. 52017international
23Thermal and Fluid Flow Analysis of Corrugated and Wavy Channels: A Comprehensive Review.International Journal of Science and Research (IJSR).L. Rajeshwar RaoVol. 7, No. 12018international
24Investigation of Thermal Performance of Different Flow Channels using Finite Volume Approach.International Journal for Science Research and Development (IJSRD).L. Rajeshwar RaoVol. 5, No. 102018international
25Experimental Investigation of Exhaust Emissions using Nano-particles coated Catalytic Converter for Four Stroke Spark Ignition Engine.International Journal for Research in Applied Science and Engineering Technology (IJRASET).Samiksha Rathore and Dr. Mukesh ThakurVol. 6, No. 62018international
26Modeling and Simulation of Four Stroke Spark Ignition Engine with Nano-particle Coated Catalytic Converter for Analysis of Exhaust Emissions.International Journal for Research in Applied Science and Engineering Technology (IJRASET).Samiksha Rathore and Dr. Mukesh ThakurVol. 6, No. 62018international
27Analysis for Pressure Drop Reduction from Ducts using Hexagonal Geometry.International Journal for Research in Applied Science and Engineering Technology (IJRASET).Bheesham Kumar DewanganVol. 6, No. 52018international
28Heat Transfer Enhancement by Modification in Hexagon Tube.International Journal for Research in Applied Science and Engineering Technology (IJRASET).Bheesham Kumar DewanganVol. 6, No. 52018international
29Analysis of the Performance Parameters of Ducts for Optimization.Research Journal of Recent Sciences (RJRS).Bheesham Kumar DewanganVol. 7, No. 22018international
30Analysis of a Duct for Performance Improvement.International Journal of Scientific and Engineering Research (IJSER).Bheesham Kumar DewanganVol. 8, No. 92017international
31Analysis of 5S Methodology in Mechanical Workshop at RCET, Raipur.International Journal for Research in Applied Science & Engineering Technology (IJRASET).D. Das, R. Sharma, T. Ahmed, S. KunjamVol. 6, No. 92019international
32Analysis & Application of 5S Methodology in Mechanical Workshop at Rungta College of Engineering & Technology, Raipur.International Journal of & Engineering Research & Applications (IJERA).D. Das, T. Ahmed, S. KunjamVol. 9, No. 42019international
33Review on Numerical Analysis of EGR Cooler.International Journal of Trend in Scientific Research and Development (IJTSRD).Dwarika SahuVol. 4, No. 62020international
34Numerical Investigation of EGR Cooler using RNG Turbulence Model.International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET).Dwarika SahuVol. 9, No. 102020international

Publications

Details of Publications in Conferences

S.N. Title of Research Paper Name of the conferenceName of Co-Author, if anyYear of Publication National/ International
1Analysis of Air Pollution Control due to Spark Ignition Engine Automobiles and its treatment using Nano-technology.Dr. Mukesh Thakur2019international
2Analysis on Utility of a Catalytic Converter Coated with Nano-particles for Pollution Control from Spark Ignition Engine Automobiles.Dr. Mukesh Thakur2020international
3Control and Measurement of Exhaust Emissions from the Compression Ignition Engine based Automobiles using a Multi-gas Analyzer.Dr. Mukesh Thakur2017international
4Utility of a Catalytic Converter with Nano-particles for decreasing Exhaust Gases Concentration Emitted from Automobiles.Dr. Mukesh Thakur2017international
5Analysis of a Catalytic Converter for Pollution Prevention from Compression Ignition Engine based Automobiles.Dr. Mukesh Thakur2017international
6Comparative Analysis of Different Catalysts used in Catalytic Converters for C. I. Engine based Automobiles.Dr. Mukesh Thakur2016international
7Analysis based on Atomic Activity of Nano-particles for Exhaust Emissions Reduction from Automobiles using Nano-Coated Catalytic Converter.Dr. Mukesh Thakur2016international
8Pollution Prevention from Diesel Engine based Automobiles using Nano-particles.Dr. Mukesh Thakur2015international
9Modeling and Optimization Challenges at the Product, Process and System Levels by Sustainable Manufacturing.2013international
10Optimization of Power Requirement for Turning Process by Geometric Programming.2012international
11Production Cost Optimization of Turning Process by Geometric Programming.2011international
12Description and Optimization of Plain Milling, Face Milling and End Milling.2012international
13Pollution Prevention from Two Stroke and Four Stroke Engines by the Application of Nano-technology.2014international
14Performance Analysis of an Elliptical Shaped Pin Fin with Ansys Mechanical.L. Rajeshwar Rao2017international
15Analysis of Performance Parameters of a Duct to Optimize its Performance.Bheesham Dewangan2017international
16Analysis for Reduction in Exhaust Emissions from Four Stroke Petrol Engine Automobiles using Different Blends of Petrol and Ethyl Alcohol as a Fuel.Dwarika Sahu2019international
17Analysis on Environmental Pollution Reduction from Spark Ignition Engine Vehicles using Copper Nano-particles coated on a Catalytic Converter.Dr. T. Rama Rao and Dr. Mukesh Thakur2020international
18Proposal of Hexagonal Ducts for Analysis.Bheesham Dewangan2018National
19Post pollution control Method for C. I. Engine automobiles using Nano-coated Catalytic converter.Dr. Mukesh Thakur2016National
20Methods of Pollution Control using Nano-particles.Dr. Mukesh Thakur2015National
21Mathematical Modeling for Turning Process Optimization to Maximize Production.2013National
22Effectiveness of geometric programming approach in turning process optimization.2012National
23Production rate optimization of turning process by geometric programming.2012National
24Comparison of different optimization techniques for machining to improve process quality.2012National
25Optimization of production time for turning process by geometric programming.2012National
26Recent Advances in Cutting Process Optimization.2012National

Other Info.

• Other Responsibilities:

RESPONSIBILITIES (ACADEMIC / NON-ACADEMIC):
Ph. D. COURSE COORDINATOR
MEMBER - ALUMNI CELL
DEPARTMENTAL TRAINING & PLACEMENT IN-CHARGE, MECHANICAL ENGINEERING
I.S.O. DEPARTMENTAL IN-CHARGE FOR TEACHING AND LEARNING PROCESS

Fellowship/Awards/Other recognitions:


Awards:
S. NO.BRIEF ACCOUNT OF AWARD YEARDETAILS OF AWARDAUTHORITY FROM WHOM RECEIVED
1GLOBAL AWARDS 20192019FOR EXCELLENCE IN RESEARCH UNDER THE CATEGORY OF HEI PROFESSORAUROPATH
2NATIONAL GREEN INNOVATION AWARD 2020-212020-21UNDER UNITED NATIONS ENVIRONMENT PROGRAMMEGREEN CARE SOCIETY OF INDIA
3MY TEACHER2021FOR EXEMPLARY SERVICE94.3 MY FM AND RAM KUNJ
42ND BEST PAPER PRESENTATION AWARD 20192ND BEST PAPER PRESENTATION AWARD IN THE DEPARTMENT OF MECHANICAL ENGINEERING AT THE 2ND INTERNATIONAL CONFERENCE ON RECENT TRENDS IN RENEWABLE ENERGY AND SUSTAINABLE DEVELOPMENT UNDER TEQIP-III, CSVTU BHILAI.
5
6

MEMBERSHIP OF PROFESSIONAL BODY/ ASSOCIATION (RECOGNITIONS):


Awards:
S. NO.PROFESSIONAL BODY TYPE OF MEMBERSHIPMEMBERSHIP NUMBERYEAR
1Indian Science Congress. Association (ISCA)Life MembershipL 223172014
2Indian Society for Technical Education (ISTE).Life MembershipLM 910392013
3Institute of Engineers (IEI - India).Life MembershipAM 14930622013
4Association for Machines and Mechanisms (AMM).Life MembershipA201600092016
5International Science Community Association (I.S.C.A.).Fellow ContributorFC – 7152019

CONFERENCES/SEMINAR / SYMPOSIA / WORKSHOP ORGANIZED:

1ORGANIZED TWO DAY WORKSHOP ON WORK - LIFE BALANCE AND STRESS MANAGEMENT CONDUCTED UNDER TEQIP – III SCHEME OF CSVTU, BHILAI (2019)
2TWO DAYS WORKSHOP ON 3D PRINTING IN COLLABORATION WITH M.S.M.E TECHNOLOGY CENTRE, DURG UNDER GOVERNMENT OF INDIA (2021)
3
4
5
6
7

ACADEMIC / R&D PROJECTS (INVOLVED / GUIDED / MENTORED :

PROJECT AGENCYDETAILSYEAR
SPONSORED PROJECT ON ENVIRONMENTAL POLLUTION REDUCTION FROM SPARK IGNITION AUTOMOBILES USING COPPER NANO-PARTICLES COATED ON CATALYTIC CONVERTER AS A CATALYST.TEQIP-III, CSVTU BHILAICO-PRINCIPAL INVESTIGATOR – I OF COLLABORATIVE RESEARCH PROJECT (COMPLETED) UNDER TEQIP-III, CSVTU BHILAI ON THE TOPIC “ENVIRONMENTAL POLLUTION REDUCTION FROM SPARK IGNITION AUTOMOBILES USING COPPER NANO-PARTICLES COATED ON CATALYTIC CONVERTER AS A CATALYST”. REF. NO. CSVTU/CRP/TEQIP-III/82 DATED 05/09/2019. PRINCIPAL INVESTIGATOR: DR. T. RAMA RAO, PRINCIPAL, BHILAI INSTITUTE OF TECHNOLOGY, RAIPUR CO-PRINCIPAL INVESTIGATOR –II: DR. MUKESH THAKUR, PRINCIPAL, NMDC DAV POLYTECHNIC, DANTEWADA. AMOUNT GRANTED: RS 150000, PERIOD OF PROJECT: 1 YEAR.2019